The good thing is that modern microwaves are created to display erroneousness codes in casing if something will go wrong. This makes it much easier to troubleshoot when you come across process errors .
When the SE error code appears on a Samsung Microwave it indicates that your unit has a key that’s stuck on the control pad or ribbon cable connection is dirty or the electronic control board has failed.
today we will discuss the SE error code that can appear on Samsung microwaves. We ’ ll talk about what the code means and ways you can fix it .
What is the Samsung Microwave SE Error Code?
As we mentioned above, SE code show up on the expose when touchpad or one of the buttons is stuck in the ON position .
The SE code is generally associated with the microwave beeping several times, displaying the code, and not working until the door has been opened and closed again .
The SE code exit can lead to the microwave operating on it ’ s own, which can allegedly result in a house fire. so, if you have this trouble, leave the machine unplugged or the door open until the compensate is completed .
Always keep in mind that microwaves can be inherently dangerous to repair. They contain inner high electric potential components that can hold a deadly electric charge even after it ’ s unplug. For this reason, if you are inexperienced it ’ s best to hire a professional to diagnose and complete any repair on this type of appliance .
however, if you are knowledgeable and would like to give it a try yourself, we ’ ll discuss how to make these repairs below .
Ways To Clear the SE Error Code
Before jumping to the conclusion that you need to either call a repair serve or purchase a new microwave, try resetting the unit of measurement .
This is done by unplugging the microwave from the wall or turning the surf off to it for at least 60 seconds .
If the error code was simply a fluke, the device will start back up and operate absolutely. however, if you keep getting this code, check the two parts below :
Key(s) Stuck on the Control Pad
Any time buttons begin to malfunction on a Samsung microwave the SE code will be displayed .
If you find that the microwave restraint launching pad, or touchpad, doesn ’ thyroxine answer, but the display hush lights up, then the problem is credibly with the control pad .
This component consists of a series of soft affect electrical switches. They are normally made from two layers of sparse Mylar plastic with material on the inner surfaces that is conductive .
A col is formed between the two surfaces that separates the conductive coating until the exploiter applies press, thus helping the two surfaces contact each other.
When this contact occurs, it completes an electrical circuit that provides stimulation signals to the touchpad .
After regular, prolonged use the conductive coatings finally disintegrate and are unable to make a good contact. This prevents the proper signals from reaching the operate dining table .
To access the control condition embroider, you will need to first unplug your Samsung microwave, and remove the cabinet .
The control pad is much attached to the actual control condition panel, and is by and large connected to the electronic restraint control panel with flat ribbon style connectors .
Before going any promote, you will want to check the joining to see if it looks okay. This part can be tested with a multimeter to determine if there is continuity .
The multimeter should read a few ohm of resistance for each control pad when it ’ sulfur engaged. If you find no continuity, you ’ ll need to replace this part .
Another thing to check is, to remove the ribbon cable from the control board and clean copper connections with an eraser and alcohol propylene.
But, If everything above will not fix the problem, then you need to replace the whole touchpad.
here ’ s how to replace the control pad :
- Unplug the unit to prevent electrical shock
- Remove the exhaust hood, also known as the vent at the top – there should be two screws
- Slide the grill up and to the left to completely remove
- If you have a freestanding unit, you may have to remove the metal from around the top and sides before moving on to the next step.
- Remove the screw that holds the display panel in place
- Pull up and pivot the panel out
- Remove all wires attached to the control panel. Remember where each connector goes to ensure proper reinstallation
- Begin reassembling the wire harnesses to the new control pad and work backward to put your microwave back together.
Failed Control Board
The lapp issues may occur if the restraint board has failed .
The control condition circuit board generates low voltages that are subsequently supplied to the touchpad. Basically, when a button is depressed, a voltage signal is sent back to the control board .
When the input signal signals are received by the see board from the touchpad or membrane switch, it uses the commands to turn on end product relays that control specific microwave components .
such components include the magnetron and motive for the turntable .
so, if the command board is not generating adequate first gear electric potential signals, or if it doesn ’ thyroxine common sense the input signal signals from the touchpad, then output signal functions will not be able to occur.
Image Credit: RepairClinic.com
Your best choice is to verify that the touchpad and connections are in good working condition, before moving onto the control board .
If you find that the control board is defective, you will need to disconnect the might to the microwave, remove the cabinet and control assembly, and install a new part .
In the end, the SE error code can cause you a great deal of headaches. Be certain to check both the touchpad and the see board, as one of these components are credibly defective. Have you ever encountered this error code with your Samsung microwave ? If so, what was your topic and what did you have to do to repair it ? Comment below, we ’ five hundred love to hear your thoughts !