How your particular over-the-range microwave is secured may vary. however, in most cases, it will be secured by screws coming from the top cabinet and by a mounting bracket attached to the back wall .
What you will need
- Power drill (recommended) or Phillips-head screwdriver
- Screwdriver and drill bits
- Blanket or tarpaulin (tarp)
- Work gloves (recommended)
- Someone to help support and lift the microwave
While the professionals may do it by themselves, you will likely require aid to hold the microwave while the screws are unthreaded and to set the microwave down once all securing screws have been removed .
It is recommended to wear work gloves when uninstalling the microwave, as you will probably come into liaison with abrupt edges that can cut your hands.
Tip: If potential, pull the range out to provide better access to the microwave .
If you are unable to move the image, it is a thoroughly mind to cover the cooktop with a dense across-the-board to catch anything that may fall during the work and to provide some security should you unintentionally drop the microwave .
Make certain you disconnect the might to the cooktop before covering it with a blanket. The last thing you want is the cooktop incidentally being turned on while the microwave is being removed .
How to uninstall an over-the-range microwave
Step 1: Disconnect the ability to the microwave and cooktop .
With most microwaves, you will be able to unplug them ; however, if your microwave is hardwired into the circuitry, you will need to open the junction box and disconnect the wires so that the microwave can be removed .
Step 2: Move or cover the cooktop with a dense blanket .
Step 3: Remove the turntable plate and turntable confirm from the microwave. Make surely the microwave is empty before proceed .
Step 4: Make certain the microwave is unplug and that the cord is unraveled so that it can come down through the hole in the cabinet when you remove the microwave .
Step 5: Locate and remove the screws above the microwave that secure it to the top cabinet. Make sure to have person hold the microwave from underneath, as once the screws are removed, the microwave will fall if not supported .
Step 6: Once the screws are removed, the microwave should drop down with only the mounting bracket on the back wall distillery broadly supporting it. With the microwave tilted down, you will need to slightly lift the back of the microwave off the mounting bracket .
If you are unable to grip the microwave to lift it off the bracket, opening the microwave doorway and reaching inside may give you the leverage you need .
Step 7: cautiously remove the microwave, making sure the power cord does not get stick or caught on something.
cautiously, put the microwave down ; congratulations, you have successfully uninstalled the over-the-range microwave .
What to do with the mounting bracket
The remaining mounting bracket may be able to be reused if you are installing a newfangled microwave. however, there are many different types of mounting brackets, so you will need to check if the new microwave will be compatible with the existing wax bracket. If the modern microwave is a different stigmatize or exemplar, you will probable need to remove the existing bracket .
The mounting bracket should be slowly to remove ; you barely need to unthread the screws securing it. normally, the bracket will be secured with stave screws, which can be removed with a socket wrench. however, sometimes toggle bolts may be used. If the bolts spin in place when attempting to remove them, they are most likely “ toggle bolts ”. To remove toggle bolts, position a putty knife behind the dash ’ s fountainhead and then pull it toward you as the bolt ’ mho removed. The toggle bolt should fall into the wall cavity .
Another way the microwave may be secured to the mounting bracket is with holding rods. In some cases, holding rods may be used to ensure the microwave does not become unstable when you open the microwave door .
To remove the holding rods, remove the front man cover of the microwave from above the door. There should be a holding bolt on each side of the microwave. The rods should be loosened with a screwdriver to allow the microwave to drop down and be released from the mounting bracket .
If you are placid having fuss, there may be a engage mechanism that requires a trip cable at the back to be pulled to release a spring-loaded trot. If you hush have trouble oneself, make surely the microwave is secured before contacting a educate technician or the microwave ’ mho manual for bracket removal instructions .
Read more: Microwave Corn on the Cob