When Your Microwave Oven Outlet Is n’t Receiving Power
In this lawsuit, the microwave display will not light up. When you try to turn on the microwave, nothing happens .
Reading: How to Repair Your Microwave
Check the GFCI Outlet
According to the electric code, outlets over kitchen counters are required to be ground-fault current interrupter dash. GFCI outlets frequently trip. Unplug the microwave, press the “ Reset ” button on the GFCI mercantile establishment, spark plug in and try again.
Test early Outlets
Your microwave may not be plugged into a GFCI-style exit but it might still be receiving GFCI protection from another mercantile establishment that is GFCI-style. While not a common practice, this does stand by to electrical code in many communities. Unplug the oven, reset all other GFCI style outlets in the kitchen, fireplug in and see if the expose lights up.
Flip the Circuit Breaker
The circuit circuit breaker on the electrical service panel may have flipped off. Locate the service jury, then locate the circuit breaker that correlates to the microwave ‘s mercantile establishment. Flip the surf off and then on again.
Test the Microwave Oven Cord
You can double-check that power is running to both the GFCI exit and into the microwave ‘s might cord with an cheap voltage detector. Touch the detector to the might cord. If it beeps or lights up ( depending on the examiner ), this means that the cord is electrified.
When the Outlet Has Power But the Oven Does n’t
In this font, you have determined that your microwave has live world power running to it, but the display does not light up and the oven will not turn on. The problem may be a blow blend. To purchase the discipline fuse, consult your owner ‘s manual. Microwave fuses are cheap and promptly available on-line .
Locate the Fuse
Access the working sphere of your microwave. If you have a countertop microwave, you will likely access it in the back by unfastening the alloy cover. If this is a permanent wave, over-the-range model, you may be able to access the inside from the front .
once inside, you will see two black wires connected to each other with a formative case between them. The fuse is located within this shell.
Remove the Fuse
Open the shell with a flat-head screwdriver and pull the fuse rid from the two wires.
Install and Test the New Fuse
Remove the new fuse from its box, taking care not to touch the conductive alloy ends with your fingers. Touch only the center area .
Push the fuse into target between the two wires and snap the shell closed .
Close the access doorway and try the microwave.
When the Microwave Carousel Seems to Be Malfunctioning
If your microwave in full powers up and runs, but the turntable or carousel that is supposed to rotate the food spins in jerks or does not spin at all, the issue may be with the carousel drive bushing coupling. The coupling is the 3- or 4-pronged plastic part that engages with the carousel to make it turn .
- It may not be engaging with the carousel (in which case, all you need to do is align the teeth) or it is so embedded with food and other gunk that it no longer adequately engages with the carousel teeth.
- On the other hand, the issue might be with the motor which might need replacement. While this fix may sound intimidating and expensive, it is neither. Microwave carousel motors, available online, are relatively cheap, small, and easy to replace.
Clean the Carousel
Open the door and remove the turntable by lifting it up. Grasp the coupling with your fingers ( not pliers ) and pull it straight up .
Clean this item in ardent, buttery urine, replace it and the carousel, and try again .
If this does not work, remove the coupling again. The coupling may be stripped at the bottom so that the motor ‘s metallic element shaft does not engage with the coupling. Purchase a new coupling on-line and replace it.
Inspect and Clean the Carousel Ring
A plastic wheeled ring surrounds the bushing coupling mentioned above and supports the turntable. Check to make surely that the wheels on this ring easily turn. If not, immerse in warm buttery urine, clean, replace, then try running the oven again. If the carousel still does not work correctly, proceed to the following step, successor of the motor.
Replace the Carousel Motor
Turn the microwave on its side ( for over-the-range ovens, you can access from the bottomland ) and remove the access dialog box with a Phillips head screwdriver.
Read more: Microwaved Corn on the Cob
- Before setting the access panel aside, you may need to disconnect a wire harness that attaches to the light. To do this, squeeze each side of the connector until the wires separate.
- Two wires connect to the motor. Slide those wires off of the motor terminals.
- Unscrew the current motor from the microwave with the Phillips-head screwdriver and remove.
- Place the new motor on the bottom of the microwave. Ensure that the flat side of the motor’s shaft aligns with the flat receiving hole in the coupler. Screw the motor into place, and attach the wires to the terminals.
- Restore the access panel, plug in, and try the microwave.
When to Call a professional
If you feel uncomfortable at all with this haunt, call in an electrician for everything leading between the servicing panel and the kitchen mercantile establishment. For matters leading from the exit to the microwave, name in a microwave technician .