How to Integrate a New Microwave (Into Cabinetry)
Moving the microwave off the counter is a bang-up way to open up a kitchen. Unless you ’ re doing a full kitchen recast, however, integrating a modern microwave into presently existing cabinetwork can involve a short construction. sometimes, it can be done with minimal attempt .
In this article, we ’ ll take a look at the options for where you can integrate a new microwave, the advantages and disadvantages of each spot and finally, if you need to do structure to set your microwave in place over a scope, a simple “ how to ” steer for doing indeed.
Where to Put a New Microwave
When deciding where to put your fresh microwave, it ’ mho important to prioritize function over aesthetics. For example, it might look bang-up over the stave, but if you much have two cooks or the acme puts it out of reach, then it ’ s not a dependable location. here are options to consider .
Over the Range
Let ’ s startle here. A microwave positioned over the range looks abrupt. It consolidates the cook area. These are definite positives and a rationality it ’ randomness been therefore democratic .
It does have some drawbacks, excessively. As note, the altitude may make it difficult for some people to reach, particularly if it ’ randomness at a safe distance above the range. If you have an excess wide roll, it might not look as estimable once in space. And when person is cooking, it may be inaccessible .
Under the Counter
This status for a modern microwave can work when there is restrict rampart space and come on area. It ’ s besides easier to access and can blend in with the cabinetwork. It besides offers a way to have the microwave out of sight .
The easier approachability, however, is besides a drawback. This may not be the best placement for families with young children, or for anyone who has difficulty bending to reach a lower come on .
As Part of the cabinetwork
You might besides call this “ Above the Counter. ” In this plant, the microwave fits good between the upper cabinets. This position can meet the need of small kitchens, or those with limited countertop quad, without putting it out of strive ( or within reach of those fiddling hands that shouldn ’ t touch it ) .
The big challenge and drawback to this position is getting it in place and looking thoroughly. You will have to do a fiddling construction. It ’ sulfur besides essential to make sure there ’ second enough space around it for ventilation .
How to Integrate a Microwave Into Cabinetry
Putting a microwave above the crop, between cabinets or under a countertop requires construction. You don ’ t need a distribute of tools, but you do want to make sure you have everything you need before you get started .
The tools you will need include :
- Screwdriver, or power driver
- Small, handheld circular or plunge saw
- Protective glasses
Read more: Baked Potato In The Microwave
now, microwaves by and large come in three sizes : 19 ”, 24 ” and 30 ”. Whichever size you choose, make sure it will not alone fit the space but have enough space for ventilation. besides, check the depth to make sure it will fit properly and not jut out into the board if you have minute cabinets. Check the manufacturer ’ sulfur recommended spacing prior to purchasing. You might find that the 24 ” is the one you need to go with but can be made to look good with a trim kit. Plan well and the construction will go much more smoothly .
once you ’ ve got your tools and materials, hera ’ south by and large what you ’ ll need to do .
To Install Over a compass
Step 1. Remove cabinet doors, as needed. If a cabinet needs to be removed, use your see to cut cautiously along the edge of the cabinet on either side .
Step 2. Drill a hole for the electrical wall socket. If you need to have an electric mercantile establishment installed, call an electrician to ensure it meets local codes .
Step 3. Install the bracket that will support the microwave .
Step 4. With aid, set the microwave in target on the bracket. Screw the holding bars in invest, or secure per the manufacturer ’ s instructions. plug in and add reduce to finish .
Depending on your specific quad requirements, you may need to do some finish up function on the cabinet, including putting in a shelf above the microwave. Sand any expose surfaces smooth to give the space a dainty, finish look .
To Install in Between Cabinetry
Step 1. Remove cabinet doors. ideally, the microwave will rest on a preexistent, fixed shelf .
Step 2. If needed, cut out the buttocks of the cabinet where the microwave will fit. If you will be moving the cabinet bottom improving, raise it at least 1 ½ inches above the peak of the microwave therefore there is adequate public discussion .
Step 3. Cut a hole for the electrical exit. fireplug in .
Step 4. Secure as needed, per the manufacturer ’ randomness instructions. Add trimming .
Step 5. Cut cabinet doors to fit the new cabinet above the microwave. For this, you would need a circular visit. Sand the bottom of the doors smooth and blot or paint with a similar color. You may need to move the situation of the lower hinges on the cabinet door if you cut that part off. Once the doors are finished and the blot or key dried, rehang the doors .