Microwave buttons not working: reasons and solutions – Ideas by Mr Right

There is absolutely no doubt about the fact that a microwave is one of the most important appliances one has in his kitchen. The main reason behind this is its serviceability. We all use microwaves several times a day-to fudge food, to heat dishes, heat urine, make popcorns and bake cakes etc. however if anything goes wrong with it, our day to day kitchen activites and routine can suffer quite a bunch. One of the park problems that may arise is problems with microwave buttons or touchpad. This is why we have come up with the chief causes and solutions for anyone face problem of microwave buttons not working .

1. Defective control panel

In most cases of microwave buttons not working, the common causal agent comes out to be defective command jury. If you wish to confirm whether this is the substantial issue, then for this you will have to press each of the buttons on the dominance jury. If some of the buttons are working ticket while others are not then you may have to replace the touchpad and the operate panel .

Our cream

GE WB56X10822 Genuine OEM Control Panel Assembly

for GE Microwaves
GE Appliances WB56X10822 Microwave Control Panel Assembly houses the excerpt buttons and expose for the microwave

Our early recommend replacements :

2. Problem with the membrane switch

Another potential induce of microwave buttons not working could be an offspring with the membrane switch. The membrane switch is more normally known as the touchpad and has a few soft tint electric switches. There is a certain conductive coat on the touchpad which can go defective with reprise usage. To check this write out and to resolve it, you will need to unplug the appliance and remove the cabinet. Check the membrane interchange using a multi meter for continuity. When pressed, it should show a few ohm of underground. If not, you may need to get it replaced .

Our nibble

Samsung Switch Membrane

Smh9187B Genuine OEM Part
Fits with diverse Samsung trade name models
OEM part- DE34-00330C

Some more membrane Switches available on-line are : –

microwave touchpadImage Credits: Flickr

3. Problem with the control board

If microwave buttons on your microwave are not working, then another possible reason behind this could be an exit with the control control panel. If the touchpad of your appliance does not respond but the display lights go on, then this could be the topic. The control condition board is creditworthy for generating a low voltage which is in turning supplied to the membrane switch. In character the control board doesn ’ triiodothyronine generate a low electric potential signal then you may need to replace it. to replace the unit, you will foremost have to disconnect the independent exponent supply and then remove the cabinet and the forum .

Our choice

General Electric WB27X11081 Microwave Control Board

Electric Circuit Board
Genuine microwave substitute control board with weight 6.4 ounces.

Some of the Control Boards available on-line : –
The above given points were the three chief causes along with their solutions to the problem of microwave buttons not working. If you are able to detect the problem correctly, you can make the replacements on your own. however it is not advised for amateurs to try replacing microwave parts on their home. They must rather reach out to professionals or technicians who are well available these days. All you need to do is to do a little search on-line or ask your friends or syndicate. For microwave buttons not working, you can contact Mr Right .