- Make sure you unplug your microwave before doing any repairs.
- Remove the inner door panel to gain access to the microwave handle mounting screws.
- Remove the broken handle and install the new one.
- Put the door back together and test your work.
Tools : Rubber gloves, handle screws, putty tongue, directly head screwdriver ,
fortunately, you shouldn ’ t need an appliance rectify technician for this repair. It is much less demanding than learning how to repair microwave interior paint. Keep in mind, though, that this appliance haunt steer can apply to either a range microwave or a counter-top microwave. You besides have the option of keeping your original handle if it hasn ’ deoxythymidine monophosphate snapped.
Reading: How to Fix a Microwave Handle
Contact your microwave ’ sulfur manufacturer to ensure you have the correct refilling cover .
Unplug Your Microwave From Power
Before doing any appliance repairs, make surely to disconnect the whole from power and wear arctic gloves while you work. This saves you from getting shocked, and it is a common pace in testing a microwave for issues .
Look at your broken microwave treat and see how bad the damage is. On most cheaper microwave models, the microwave door handle is made of credit card. unfortunately, formative snaps, requiring a sum substitute. Reach out to your microwave manufacturer for a refilling wield, so you ’ re certain to get the right character .
Open Microwave and Check the Door
Open your microwave door and make sure you can access the inner doorway control panel. sometimes crossheading screws are holding the jury in put. If indeed, remove them, but remember that you may need to remove the door raw to access the screws .
Remove the Inner Panel
Remove the screws, if any, holding the inner jury in place. then, use your putty tongue or flathead screwdriver to pry the inner and out door control panel apart. Be careful not to damage the microwave door ’ second glass or chip the microwave house while you work .
Remove the Broken Handle
now that you have access to your microwave treat ’ mho mounting hardware, find the crosshead screws holding your manage in place. Use your screwdriver to remove these. Depending on your microwave model, it will have four to six screws .
Install the New Handle
now that the break treat is free, it ’ s time to install the new one. You can reuse the screw you precisely removed, or you can use new screws for a fresh start. First, make certain your handle is tied and tighten it in position .
Reinstall the Microwave Door Panel
Be careful not to cause control panel damage, or it may malfunction. At the same meter, press the inner and out door panels bet on together. Take your clock and try not to force the door together. Find the screw holes and reinstall any mount hardware back into the microwave door.
Read more: Microwaved Corn on the Cob
Check Your work
here, we ’ ra just checking the constancy of our manage. Try open and closing the microwave door a few times to see if the handle is loose. If you don ’ thymine poster any play or wiggle, your influence is done, and your microwave handle is repaired .
Take enhance guard measures when working on microwaves to avoid injury. If the repair seems besides complicated or requires messing with electric parts, take it to a rectify shop .
Should you replace or repair your microwave?
In all cases, if it is possible, repair your appliance. That said, if your microwave is over five years old, you may want to replace it .
What glue is microwave safe?
Most glues are safe for the outside of a microwave. That said, you should never use glue inside the microwave, as it will poison your food .
How do you replace a microwave?
Read more: How to Dry Herbs in the Microwave
If your microwave is broken, take it to an electronics recycling center for safe disposal. Use your new microwave manual of arms for the best way to install it above your oven or countertop .
STAT: A US Department of Energy survey found that 37 % of Americans use their microwave three to five times a day. ( source )