Can I put a hot water bottle in the microwave? – Nanjing Superfit I&E Co., Ltd.

Can I put a hot water bottle in the microwave? We recommend against this unless the manufacturer distinctly marks it as microwaveable. Most traditional hot water bottles are made of condom and will melt. Try to heat body of water in a microwave safe cup and pour it into a blistering water bottle. Be careful not to burn yourself when pouring-a funnel may help.
This passing is going to talk about the followings of using hot water bottle :

( 1 ) Can I put a hot water bottle in the microwave ? ( 2 ) How to fill a hot body of water bottle ? ( 3 ) How to maintain hot water bottle ?

( 1 ) Can I put a hot water system bottle in the microwave ?

It is dangerous to heat a hot body of water bottle in a microwave oven, never try ! When the microwave oven is heated, the water and the bag will be heated together, which will make the water udder easy, produce water vapor, and possibly explode ! consequently, it is best not to use a microwave oven to heat the hot water bottle. If there is no early kettle for heating body of water, consider using a non-sealed container to heat the water first, and then pour it into the hot water bottle ! Under normal circumstances, the hot water system bottle will be sealed to prevent escape. If the gasoline generated by urine heat can not escape, it will explode.

( 2 ) How to fill a hot urine bottle ?

here are some precautions for filling a hot water bottle with hot water. Do not use boiling water when filling. very good hot water is beneficial, but boiling water can cause cracks or leaks, thereby shortening the biography of the blistering water bottle. Avoid pouring water system from the domestic hot water system because impurities will shorten the life of the bottle. The prefer method acting is to use water from a kettle that has been boiled and cooled. Fill lento to avoid splashing back and make surely the funnel is empty when you are done. For those who have never used them, you will find that using them regularly will find the perfective calories that suit you best. Do not heat in a microwave or conventional oven. improving to three quarters, do not overfill. Overfilling will cause it to crack, filling to the correct level will emit a lot of heat, and the effect will be the same. Carefully lower the hot water system bottle onto a flat airfoil until body of water appears at the opening, expelling surfeit air. It may be helpful to cover the bottle with a towel while heating the water when filling, which will help avoid scalding. For unstable hands, there is a PVC or TPU hot water bottle with a wide neck opening, so it is easier to pour out and helps avoid spills and spills. When tightening the plug, please make sure it is tightened correctly. Hand tightening should be sufficient. Tightening excessively mean will cause the seal to rupture and leak. With one hand on your neck, hold the hot water bottle good to loosen the stopper. When tightening the plug, do not twist your torso under the neck, because twisting will increase the pressure on the neck joints. If you continue to twist, the joints will be designed for internal persuasiveness, rather than cracking to resist distortion. If the hot water bottle conversation stopper is unleash, please replace it with a modern one, be certain to replace it frequently.

 

( 3 ) How to maintain hot urine bottle ?

How can I make the hot water bottle death long ? here is the answer. Avoid touch with hot surfaces, vegetable oil, grease and steer sunlight. Keep aside from sharp objects, including darling claws and teeth. When storing the drain pipe completely, remove the stopper and store in a cool, frost-free place. When using it again, perform a thorough ocular inspection. When opening or closing the conversation stopper, do not use boiling water system, and always keep the hot water bottle against your neck. Twisting it without support will weaken the shoulder and finally tear. Our products including Medical Apparatus , Ice Bag Pack, contact us now.